# Complete a Quality Check

Your plant's quality checks are set up as **check sheets**: a list of things to measure or confirm, such as a diameter, a
coating thickness, or *Guard in place: Yes / No*. Kanoa schedules them for you, at the start of a run, on a mode change, at
a shift change, or every so often while the machine runs. This lesson shows you how to find a check when it comes due and
complete it.

## Find a Check That's Due

When a check is coming due, due or overdue, the **Notifications** card on the info panel says so. Tap the card, then tap
the check to open it.

You can also find your checks in **Quality → Schedule → Active Checks** or **Check Table**. Double-click a
check to open it.

![Active Checks](https://docs.kanoa.ai/img/quality/activeChecks.png)

:::tip
Complete checks when they come due, not when they're overdue. A missed check shows on your supervisor's reports, and a
problem caught late means more parts to scrap.
:::

## Enter the Values

The check sheet lists each check, grouped if your plant has set up groups. A progress bar at the top shows how much you've
done.

![Check sheet](https://docs.kanoa.ai/img/quality/quality-checks-check-sheet.png)

1. Enter a value for the selected check. For a pick list, such as *Pass / Fail*, tap the button. For a number, use the
   keypad.
2. After each value, the next check is selected for you.
3. Tap the blue **i** icon on a check if you need its instructions.

Each check is colored when you've entered it, against its limits:

- A value outside the **entry limits** isn't accepted. Kanoa tells you the allowed range: check your reading and enter it
  again.
- A value inside the entry limits but outside the **specification** is saved, but shown in red as failed.

## Submit the Check

1. If any check failed, add a comment saying what you found and what you did, such as *Re-measured, still 0.2 mm over.
   Stopped the line and called quality*. A check sheet with a failure can't be submitted without a comment.
2. Submit the check sheet.

If you open a check by mistake, you can cancel it at any time before you submit.

:::warning
A failed check isn't something to submit and forget. Follow your plant's procedure for a failed check, which usually
means telling your supervisor or quality straight away.
:::

## Checks on a Mobile Device

You can complete the same checks on a phone or tablet. Open **Mobile Check Schedule** from the menu, and open the check.
On mobile you can also take a photo or video with a check, which is useful to show a defect.

::embed-section{src="../../kanoa-quality/entering-checks.md" collapsed="true" summary="Reference Materials: Entering Checks - Check entry, controls and mobile."}

## Check Your Understanding

1. How do you know a quality check is coming due?
2. You enter a value and Kanoa refuses it with an allowed range. What does that mean?
3. One check failed. What must you do before you can submit?

<details>
<summary>Answers</summary>

1. The **Notifications** card on the info panel says so.
2. The value is outside the check's entry limits. Check the reading, and enter it again.
3. Add a comment saying what you found and what you did.

</details>

## You've Finished the Operator Track

You can now run a shift on your machine in Kanoa: open it, run production, give every stop and every scrapped part a
reason, change over, and keep up with your quality checks.
