# Approve and Reject

When a check sheet has **Sign Off Required**, a submitted check waits until someone reviews it. That person approves it, or
sends it back. Only **Approved** checks count in reports and SPC, so this review is how you protect your data. This lesson
shows you how.

:::info
Approving and rejecting a check needs the **Approve Checks** security function. It is separate from **Configure Quality**.
:::

## Find the Checks That Need Review

A check moves from **In Progress** to **Submitted** when an inspector submits it. If the sheet needs no sign-off, it goes straight
to **Approved**.

1. Open **Quality → Schedule → Active Checks** or **Quality → Schedule → Check Table**.
2. Look for checks with the status **Submitted**.
3. Open one. It opens for viewing.

![Check Table](https://docs.kanoa.ai/img/quality/checkTable.png)

{/*
TODO: Confirm on a gateway whether Submitted checks can be filtered on, and what a manager sees when opening a Submitted check.
*/}

## Approve a Check

1. Open the submitted check.
2. Check the values and the comments, especially any failed items.
3. Use the approve button.

The check becomes **Approved** and is now used in reports and SPC.

{/*
TODO: Confirm on a gateway where the approve button is on a Submitted check and what it is labeled. The product docs name only a button btnApprove on the check sheet event editor.
*/}

::embed-section{src="../../configuration/securityFunctions.md#approve-checks" collapsed="true" summary="Reference Materials: Approve Checks security function."}

## Reject a Check

You reject a check so it can be corrected. The product docs describe rejecting an **Approved** check.

1. Open the check from **Check Table**.
2. Use the toggle at the upper right to switch from view mode to edit mode.
3. Click **Reject**.

The check can now be corrected. The inspector changes the wrong value and resubmits it. See
[Revise and Correct](../6-quality-inspector/5-revise-and-correct.md) for the inspector's side.

:::warning
While a check is rejected, it isn't Approved, so reports and SPC leave it out. Make sure it is corrected and resubmitted.
:::

{/*
TODO: Confirm on a gateway whether a check that is still Submitted can be rejected the same way, whether a reason is asked for, and where the rejected check shows up for the inspector.
*/}

## After the Correction

A resubmitted check goes back to **Approved** if its check sheet needs no sign-off. Otherwise it waits as **Submitted** for you
to approve it again.

If the check sheet itself is wrong, such as a missing question or a wrong limit, reject doesn't help. Change the check
sheet through a [revision](./6-release-and-revise.md).

::embed-section{src="../../kanoa-quality/checkSheets.md#timers" collapsed="true" summary="Reference Materials: Timers - How a check moves from Coming Due to Approved or Rejected."}

## Check Your Understanding

1. Which security function lets you approve a check?
2. Why do reports and SPC leave out a **Submitted** check?
3. An inspector's check has a wrong value. What do you do, and what does the inspector do?

<details>
<summary>Answers</summary>

1. **Approve Checks**.
2. They use only **Approved** checks.
3. You reject the check. The inspector corrects the value and resubmits it.

</details>
