Skip to main content

Schedule a Check Sheet

A check sheet does nothing until something schedules it. A trigger tells Kanoa when to schedule it, such as at a shift change or when a new product starts. Timers decide how long inspectors have to start the check. This lesson shows you how to set both.

info

Changing triggers needs the Configure Quality security function. On a released check sheet, you change triggers through a revision. See Release and Revise.

Add a Trigger​

  1. Open Configuration → Quality → Check Sheets and open the check sheet.
  2. Go to the Triggers tab.
  3. Click the + button to add a trigger, or the edit button to change one.
  4. Choose the trigger type, set its options and timers, and save.

Triggers tab

Trigger editor

You can add more than one trigger. A check sheet with no trigger can still be scheduled by hand.

Choose a Trigger Type​

TriggerWhen it schedules the check sheet
ManualOnly when someone adds the check. It sets how long the inspector has to take it.
Mode ChangeWhen an asset changes mode, such as Changeover to Production. An optional From Mode limits it.
Product ChangeWhen the running product changes.
Shift ChangeWhen the current shift matches the trigger's shift settings.
Timed IntervalPeriodically, based on the mode and shift settings.
RecurringOn a repeating calendar rule, such as every weekday at 6:00. Times use the asset's site time zone.
State ChangeWhen an asset has been in a chosen state for at least the minimum time.
Infeed Count, Outfeed Count, Waste Count, General CountEvery n counts of that counter.
Re-TestWhen a check sheet is scheduled because a re-test is needed.

A Product Change trigger has three options:

  • Every Product requires a check every time the product changes.
  • Unique Products Per Shift requires a check once per product per shift.
  • Once Per Shift requires one check per shift.

A trigger that fires while the check sheet is already scheduled aborts the old one if it hasn't been started, and creates a new one.

Reference Materials: Trigger Types - Every trigger type and how count triggers work.

Trigger Types​

  • Manual: A check sheet can be manually created without this trigger, however if manual trigger is created, it will specify how much time a user has to take the checks once it has been scheduled.

  • Mode Change: When the mode changes on an asset i.e. from Changeover to Production, this trigger will schedule a check sheet if it meets the specified mode/shift, other options. An optional From Mode limits it to a change from that mode, so a check sheet can run on Changeover to Production but not on Maintenance to Production.

  • Product Change: When the product changes on an asset, this check sheet will be scheduled if the currently running product is specified by the check sheet.

    • Every Product: Quality check is required every time the product changes
    • Unique Products Per Shift: Quality check is required only once per product per shift
    • Once Per Shift: Only one quality check will be performed per shift
  • Re-Test: Set the delay, coming due etc. when a check sheet is scheduled due to a re-test being required.

  • Shift Change: Check sheet will be scheduled if the current shift meets the shift settings of this trigger.

  • Timed Interval: This check sheet will be triggered periodically based on the mode and shift settings.

  • Recurring: The check sheet is scheduled on a repeating calendar rule (every weekday at 6:00, the first Monday of the month, ...). Times are in the asset's site time zone, so 6:00 stays 6:00 at the plant across daylight-saving changes, whatever time zone the gateway runs in.

  • State Change: The check sheet is scheduled when an asset has been in one of the chosen states for at least the minimum time (For at least n mins), for example a check after a line has been Blocked for 10 minutes. It's scheduled once each time the asset goes into the state, so a short stop that clears before the minimum time doesn't trigger a check.

  • Infeed Count, Outfeed Count, Waste Count: The check sheet is scheduled every n counts of the asset's infeed, outfeed or waste counter.

  • General Count: The same, for one of the asset's general counters, by its name.

    For the count triggers, the count starts when the trigger is added and never resets: it carries on across product and shift changes, and what's left over after each n counts toward the next. When n counts are reached while a check sheet is still open, that check is skipped. Counts made while the check sheet doesn't apply (another shift, product, mode or tool than its settings) aren't counted.

State Change and the count triggers are checked by the quality timer, so a check sheet is scheduled within one timer interval of the state's minimum time or the count being reached.

Note If a trigger causes a new check sheet to be scheduled when there is already an existing check sheet scheduled, it will set the current check sheet to aborted if it has not already been started and create the new check sheet.

Set the Timers​

Each trigger has four timers, all in minutes.

TimerWhat it does
DelayTime between the trigger firing and the check sheet being scheduled. Until it passes, no screen shows the check.
Coming DueHow long a scheduled check shows as upcoming before it becomes due.
Over DueHow long the inspector has to start the check once it is due.
GraceHow long the check stays over due before it is Missed.

A check that nobody starts moves through these statuses on its own:

In Delay → Coming Due → Due → Over Due → Missed

It is In Delay only when the trigger has a Delay. A Missed check shows on compliance reports.

A common use of Delay is a shift-change trigger, so the incoming shift has time to settle before checks appear.

Use the Manual Trigger​

A check that an inspector adds with Add Check is Due as soon as it's added, so Delay and Coming Due don't apply. Only the Manual trigger's Over Due and Grace do.

For example, with Over Due 30 and Grace 30, a manual check is Over Due after 30 minutes and Missed after 60. The sample Receiving Inspection uses this.

note

State Change and the count triggers are checked by a timer on the gateway. A check can be scheduled up to one timer interval after the state or count is reached.

Reference Materials: Timers - Delay, Coming Due, Over Due, Grace and the check statuses.

Timers​

  • Delay: Delay in minutes between a trigger executing and the check sheet being scheduled. Primarily used on shift change to give shift personnel a chance to drink their tea before being bombarded with checks to be performed. Until it passes, the check is In Delay: no screen shows it, and the trigger won't create another.
  • Coming Due: Once a check sheet is scheduled, indicates to a user how long they have in minutes before this check will become due. For Recurring and Timed Interval triggers, it's how far ahead of the due time the check appears.
  • Over Due: Provides amount of time in minutes a user has to start performing the checks once it becomes due.
  • Grace: Number of minutes a check sheet will remain over due before its status is set to 'Missed'.

A check sheet added by hand (Manual trigger) is due as soon as it's added, so its Delay and Coming Due don't apply. With Over Due 30 and Grace 30, it's Over Due after 30 minutes and Missed after 60.

A scheduled check sheet that hasn't been started moves through the following statuses on its own, driven by its trigger's timers:

In Delay → Coming Due → Due → Over Due → Missed

A check is In Delay only when its trigger has a Delay; with none it starts Coming Due.

A check sheet added by hand (Add Check) skips In Delay and Coming Due: it's Due as soon as it's added, so only the Manual trigger's Over Due and Grace apply to it. Delay and Coming Due apply to checks a trigger schedules.

When someone starts filling out a check sheet, it will automatically move to 'In Progress'.

  • Submit moves it to Submitted. If the sheet doesn't require a sign-off, it goes straight on to Approved.
  • An Approved check can later be Rejected so it can be corrected: open it from the Check Table, switch it from view to edit mode with the toggle at the upper right, and click Reject. Change the values and resubmit it. Rejecting and approving need the Approve Checks security function.
  • A check that hasn't been approved can be Cancelled or Disabled.

Reports and SPC only look at Check Sheet events that are in the Approved status.


Check Your Understanding​

  1. An inspector adds a check by hand. Which timers apply to it?
  2. Which timer decides when a check becomes Missed?
  3. Why would you add a Delay to a shift-change trigger?
Answers
  1. Only Over Due and Grace from the Manual trigger. Delay and Coming Due don't apply.
  2. Grace. It is how long the check stays over due before it is Missed.
  3. So the incoming shift has time to settle before checks appear.