Record Scrap
Scrap counts against your run's quality, so it has to be counted. Like downtime, it's only useful with a reason: 300 scrapped tells your supervisor less than 300 scrapped for coating defects.
Many machines count waste on their own, from the PLC. You count it by hand when the machine can't, for example parts you reject at inspection. Counting scrap needs the Edit Operations security function.
Open the Count Editor
- On the Asset Operation screen, select the Current Run tab under the info panel cards.
- Tap the Output box. The Count Editor opens for the current run.
Count Waste with a Reason

- In the Count Editor, stay on the Buttons tab and find Waste Counters. Each waste reason your plant has set up for this machine is a button, such as Bad Color or Box Crush Damage.
- Enter the quantity in Count Increment.
- Click the button for the reason. The count is added straight away.
The Waste total at the top of the Count Editor goes up, and the count appears on the Table tab with its quantity and reason.
Use the reason buttons, not Add. Add counts waste with no reason.
Count scrap with the right reason even when the machine already counts the waste. Waste counted without a reason shows on your supervisor's charts as uncoded scrap, so they can see how much there is, but not what to fix.
Correct a Count
If you counted the wrong quantity or reason, correct it in the Count Editor for the run. A count you correct for an earlier run is edited the same way: tap the Run Review tile, select the run, and open its counts.
Check Your Understanding
- Where do you open the Count Editor from?
- Why does the reason matter if the machine already counts its waste?
Answers
- The Output box on the Current Run tab.
- Waste without a reason shows as uncoded scrap: your supervisor can see how much was lost, but not why.