Skip to main content

Raise a One-Time Work Order

In Kanoa, you don't create each work order by hand. You create a work order template, and the template generates the work order. For a breakdown or a one-off job, you use a template with the One Time schedule type. It generates a single work order.

Create the Template​

For example, the Machine 1 operator reports coolant pooling under the machine. That's a one-off repair.

  1. Open Configuration → Maintenance → Work Orders and, on the Work Orders tab, add a template.

  2. Fill in the details:

    FieldExample
    TitleMachine 1 - Coolant leak
    DescriptionOperator reports coolant pooling under the machine near the chip conveyor.
    AssetCoreForge\Philadelphia\Machining\Machine 1
    Maintenance typeCorrective
    PriorityHigh
    Requested byYour own user
    Schedule typeOne Time
  3. Save the template.

The priority lookup

Release It​

A template is not used until its version status is Released. Until then you can prepare it.

  1. Open the template and set its version status to Released.
warning

Releasing a One Time template generates a real work order straight away, and technicians will see it. Check the asset, priority and description first.

Version status options

Reference Materials: Version Status - Why a template must be Released.

Version Status​

Work orders can be created, but will not be scheduled or used until they have been set to a 'Released' version status.

kanoa-cmms


Find and Assign the Work Order​

  1. Open Maintenance → Work Orders.
  2. Find Machine 1 - Coolant leak in the Open group. Its name starts with MWO, such as MWO00001.
  3. Set Assigned To to a technician. The work order moves to Assigned.

The technician then works it as in Your Work Queue. The time between creating and assigning it is what MTTA measures.

Reference Materials: Schedule Types - One Time, Recurring and Condition.

Schedule Types​

A Work Order template includes a Schedule Type, which determines how work orders are generated. When a template is active i.e. 'Released', the system evaluates its schedule configuration. When the criteria are satisfied, an actual work order is created.

Kanoa Maintenance supports three primary schedule behaviors:

One Time

Use One Time when the template should generate a single work order.

This is useful for:

  • one-off repairs
  • installation work
  • project tasks
  • ad hoc maintenance requests

When a template is configured as One Time, the system generates one actual work order from that template.

Recurring

Use Recurring when the template should continuously generate work orders on a defined schedule.

This is typically used for:

  • preventive maintenance
  • routine inspections
  • repeating safety checks
  • calendar-based maintenance programs

When a template is configured as Recurring, the system creates actual work orders according to the recurrence settings. The schedule's times are in the asset's site time zone (UTC if the site has none), so a work order due at 06:00 stays at 06:00 at the plant across daylight-saving changes.

Recurring schedules are best used when maintenance should happen on a predictable interval, such as:

  • every day
  • every week
  • every month
  • every X days/hours depending on schedule configuration

kanoa-cmms

Condition

Use Condition when the template should generate work orders only after a defined asset condition, counter, or threshold is met.

This is typically used for:

  • runtime-based maintenance
  • counter-based maintenance
  • threshold-triggered inspections
  • condition-based corrective or preventive work

When a template is configured as Condition, the maintenance order can be set to be triggered whenever the asset run hours or counter values reach a certain threshold, or, for a tool, when its tool life comes due. Condition scheduling is useful for maintenance strategies that should not be driven by calendar date alone.


kanoa-cmms


kanoa-cmms


Tool Life works with Kanoa Ops tooling. It's only offered when the template's Asset is a tool, such as a mold, so select the tool first. Set Due for to the tool limit the work order covers: its PM, refurbishment or calibration. A work order is created when the tool reaches its Warn at % of that limit, and completing the work order resets that count, the same as recording it on the tool's Life tab. The tool's work orders are listed on the Maintenance tab of its tool editor.


kanoa-cmms


Worked Example​

The CoreForge sample plant raises a one-time work order for a coolant leak on Machine 1, the same as Developer Training.

Create the Work Order Template​

The Machine 1 operator reports coolant pooling under the machine. That's a one-off repair, so it gets a One Time template.

Create the work order template
  1. Navigate to Configuration → Maintenance → Work Orders and, on the Work Orders tab, add a template.

  2. Fill it in:

    FieldValue
    TitleMachine 1 - Coolant leak
    DescriptionOperator reports coolant pooling under the machine near the chip conveyor.
    AssetCoreForge\Philadelphia\Machining\Machine 1
    Maintenance typeCorrective
    PriorityHigh
    Requested byYour own user
    Schedule typeOne Time
  3. Save, then set its version status to Released.

Releasing the template generates the work order. Templates that are still Draft are never scheduled, so you can prepare them in advance.

Reference Materials: Version Status

Version Status​

Work orders can be created, but will not be scheduled or used until they have been set to a 'Released' version status.

kanoa-cmms


Check Your Understanding​

  1. How do you raise a one-off repair in Kanoa Maintenance?
  2. What must you do before a template generates its work order?
  3. How do you give a work order to a technician?
Answers
  1. Create a work order template with the One Time schedule type. It generates one work order.
  2. Set its version status to Released.
  3. Open it in Maintenance → Work Orders and set Assigned To.