Skip to main content

Parts for the Job

Many jobs need a spare part. This lesson shows how to find the part, check whether the storeroom has it, and record that you took it, so the stock count stays right. The examples use CoreForge's Parts Room.

Needs Kanoa Inventory

Parts, stock and storerooms are part of Kanoa Inventory, which is licensed separately from Kanoa Maintenance. Your gateway needs a Kanoa Inventory license, and an administrator must turn it on (Enable Kanoa Inventory, under Configuration → Application → Settings). Without a license it only runs in trial mode. If your plant doesn't have it, skip this lesson.

Find a Part​

  1. Open Inventory → Parts.
  2. Find the part in the list. It shows each part's category, part number, description, manufacturer and on-hand quantity.
  3. Filter or sort the list to narrow it down.
  4. Expand the part's row with the ▶ arrow.
Reference Materials: Browsing Parts - Filter, sort and expand the parts list.

Browsing Parts​

The parts list is filterable and sortable. Expand any row using the ▶ arrow to see the part's inventory across all storeroom locations and its full transaction history.


Check the Stock​

The expanded row shows the part's stock at each storeroom location.

ColumnWhat it tells you
On HandWhat's physically in the storeroom now.
ReservedQuantity allocated to open work orders but not yet taken.
On OrderQuantity on purchase orders not yet received.
AvailableOn Hand minus Reserved. This is what's really free to use.

Check Available, not just On Hand. Stock reserved for another work order isn't free for yours.

Reference Materials: Stock Visibility - Every column in the expanded part row.

Stock Visibility​

The expanded part row in Inventory → Parts shows the live stock position at each location:

ColumnDescription
On HandCurrent physical quantity in the storeroom
ReservedQuantity allocated to open work orders but not yet physically removed
On OrderQuantity on open purchase orders not yet received
AvailableOn Hand minus Reserved
Min / MaxPolicy bounds for this location
Reorder PointPolicy reorder trigger
Reorder QtyPolicy reorder quantity
Safety StockPolicy safety buffer
UOMUnit of measure
Cycle CountDays between physical counts
Managed StockWhether a stocking policy is active

Finding Parts Below Reorder Threshold​

On a dashboard, the Needs Reordering widget (in the Inventory widget category) lists every stocked part below its reorder point. The Reorder Status Donut and Critical Spares Watchlist widgets summarize the same thing. A part's own stock rows show its Reorder Point and Reorder Qty.

Via script:

data = system.kanoa.inventory.getPartInventoryStock({
'inventoryAssetId': warehouseAssetId,
'isStocked': True,
'isBelowReorderThreshold': True,
})

Issue the Part to the Work Order​

When you take a part from the storeroom for a job, record it on the work order.

  1. In Maintenance → Work Orders, open the work order.
  2. Open the Parts Used tab and click Add.
  3. Set Transaction Type to Issue from inventory, then pick the Part # and the Inventory Location you took it from, such as the Parts Room.
  4. Check the Asset it's used on, and enter the Qty. Add a Lot / Batch or Notes if you need to.
  5. Click Save.

The part is listed on the Parts Used tab, On Hand drops straight away, and the issue appears in the part's transaction history with your name, the date and the work order.

Issuing to the work order keeps the cost and the stock movement with the job. That shows what each repair used, and which machines use which parts.

Issue a Part Without a Work Order​

For a part taken for something that isn't a work order, record it from the part instead.

  1. Expand the part in Inventory → Parts.
  2. Click Add Part Transaction (the + icon in the Parts Inventory toolbar).
  3. Pick the Inventory Location, enter the Qty, set Transaction Type to Issue from inventory, and say what it was for in Notes.
  4. Click Save.
Reference Materials: Issuing Parts - Ad hoc issues and issues against a work order.

Issuing Parts​

Ad-hoc Issue​

To issue parts without a work order (e.g. a one-off repair or adjustment):

  1. Expand the part in Inventory → Parts.
  2. Click Add Part Transaction.
  3. Set Transaction Type to Issue (or the appropriate type for your operation).
  4. Enter quantity, location, and optional notes.
  5. Click Save.

Issue Against a Maintenance Work Order​

Parts consumed during a maintenance activity can be tracked directly against the work order event. This provides full traceability between stock consumption and maintenance history.

In the UI, open the work order in Maintenance → Work Orders, go to its Parts Used tab and click Add. Choose Issue from inventory as the Transaction Type, then the Part #, the Inventory Location it came from, the Asset it's used on and the Qty, and save. The tab lists every part issued to the work order.

Via script:

inventoryTransactionId, err = system.kanoa.inventory.issuePartToWorkOrderEvent({
'partId': partId,
'quantity': 2,
'workOrderEventId': workOrderEventId,
'inventoryAssetId': warehouseAssetId,
'assetId': maintainedAssetId,
'usedBy': technicianUserId,
'unitCost': 3.75,
}, userId)

To retrieve all parts consumed against a set of work order events:

data = system.kanoa.inventory.getPartsUsedByWorkOrderEvents({
'workOrderEventId': workOrderEventId,
})

tip

Mistakes aren't edited out. A transaction can't be changed after it's saved. A storeroom person corrects it with an adjustment, as in Storeroom Tasks.

Check Your Understanding​

  1. Which stock figure tells you what's really free to use?
  2. Where do you record a part you took for a work order?
  3. Why issue it on the work order rather than just from the part?
Answers
  1. Available, which is On Hand minus Reserved.
  2. On the work order's Parts Used tab: Add, then Issue from inventory.
  3. So the part, its cost and the stock movement stay with the job it was used on.