Skip to main content

Storeroom Tasks

These tasks keep the storeroom's numbers honest: what came in, what was found on the shelf, and what's running low. Every change is a transaction in the part's history, so you can always see who changed what and when.

Needs Kanoa Inventory

Parts, stock and storerooms are part of Kanoa Inventory, which is licensed separately from Kanoa Maintenance. Your gateway needs a Kanoa Inventory license, and an administrator must turn it on (Enable Kanoa Inventory, under Configuration → Application → Settings). Without a license it only runs in trial mode. If your plant doesn't have it, skip this lesson.

Receive a Delivery​

When parts arrive from a supplier, record a receipt.

  1. In Inventory → Parts, expand the part that arrived.
  2. Click Add Part Transaction (the + icon in the Parts Inventory toolbar).
  3. In the Part Inventory Editor, pick the Inventory Location that received the stock, such as the Parts Room.
  4. Enter the Qty received. It must be more than 0.
  5. Set Transaction Type to Receipt to inventory.
  6. Add a Lot / Batch number if you have one, and the purchase order number in Notes, such as PO-2026-0101.
  7. Click Save.

On Hand updates straight away.

Reference Materials: Receiving Stock - The fields in the Part Inventory Editor.

Receiving Stock​

When parts arrive from a supplier, record a receipt transaction to increase on-hand stock.

Via the UI​

  1. In Inventory → Parts, expand the part row.
  2. Click Add Part Transaction (the + icon in the Parts Inventory toolbar).
  3. The Part Inventory Editor opens.
FieldDescription
Inventory LocationThe storeroom location receiving the stock
QtyQuantity received (must be > 0)
Transaction TypeSelect Receipt to inventory
Lot / BatchOptional lot or batch number
NotesOptional reference notes (e.g. PO number)

Click Save. The on-hand balance updates immediately and the transaction is recorded in the history.

Via Script​

inventoryTransactionId, err = system.kanoa.inventory.addInventoryTransaction({
'inventoryAssetId': warehouseAssetId,
'partId': partId,
'quantity': 100,
'inventoryTransactionTypeId': receiptTypeId,
'supplierId': supplierId,
'referenceType': 'PO',
'referenceNumber': 'PO-2026-0441',
'unitCost': 3.75,
}, userId)

Adjust a Count After a Cycle Count​

A cycle count is a physical count of a part on the shelf. If it differs from what Kanoa shows, record the difference.

  1. Expand the part and click Add Part Transaction.
  2. Pick the location, and enter the Qty as the difference. If Kanoa shows 12 and you count 2, enter 10.
  3. Set Transaction Type to Negative adjustment if you found less, or Positive adjustment if you found more.
  4. In Notes, enter Cycle count, and click Save.

Never try to edit an old transaction. The history can't be changed, so an adjustment is how you correct it. The history records who made the adjustment and when.

The Cycle Count column in the expanded row shows how many days there should be between counts for that part.

Reference Materials: Transfers and Adjustments - Correct a balance or move stock between locations.

Transfers and Adjustments​

A transfer moves stock from one inventory location to another. Use Transfer in and Transfer out transaction types to record the movement at each end.

If a physical count reveals a discrepancy, use a Positive adjustment or Negative adjustment transaction type to correct the on-hand balance. The transaction history records who made the adjustment and when.

Both operations use Add Part Transaction in the UI or addInventoryTransaction via script with the appropriate transaction type.


Find Parts to Reorder​

Each part can have a stocking policy at a storeroom. It sets a Reorder Point, a Reorder Qty and a Safety Stock. You don't set these. You read them in the expanded part row.

  1. Expand the part and compare On Hand with Reorder Point.
  2. If On Hand is at or below the reorder point, the part needs ordering. Reorder Qty says how many.
  3. Check On Order. If an order is already open, you may not need another.
  4. If On Hand is below Safety Stock, tell your supervisor, because that's an urgent shortage.

For example, CoreForge's coolant filters have a reorder point of 6 and a reorder quantity of 12. After a count leaves 2 on the shelf, the part is below its reorder point.

To see every part that needs ordering at once, use a dashboard with the Needs Reordering widget. It lists each stocked part below its reorder point. The Reorder Status Donut and Critical Spares Watchlist widgets give the same picture at a glance. Ask your Maintenance Manager or administrator to add them to your dashboard if they aren't there.

note

Parts need a stocking policy and a stocked flag at the storeroom before reorder alerts work. If a part's policy columns are empty, ask your Maintenance Manager to set one.

Reference Materials: Stock Visibility - On Hand, Reserved, On Order and the policy columns.

Stock Visibility​

The expanded part row in Inventory → Parts shows the live stock position at each location:

ColumnDescription
On HandCurrent physical quantity in the storeroom
ReservedQuantity allocated to open work orders but not yet physically removed
On OrderQuantity on open purchase orders not yet received
AvailableOn Hand minus Reserved
Min / MaxPolicy bounds for this location
Reorder PointPolicy reorder trigger
Reorder QtyPolicy reorder quantity
Safety StockPolicy safety buffer
UOMUnit of measure
Cycle CountDays between physical counts
Managed StockWhether a stocking policy is active

Finding Parts Below Reorder Threshold​

On a dashboard, the Needs Reordering widget (in the Inventory widget category) lists every stocked part below its reorder point. The Reorder Status Donut and Critical Spares Watchlist widgets summarize the same thing. A part's own stock rows show its Reorder Point and Reorder Qty.

Via script:

data = system.kanoa.inventory.getPartInventoryStock({
'inventoryAssetId': warehouseAssetId,
'isStocked': True,
'isBelowReorderThreshold': True,
})

Check Your Understanding​

  1. A delivery arrives. Which transaction type do you use?
  2. Kanoa shows 12 filters but you count 2. What do you record?
  3. How do you tell a part needs reordering?
Answers
  1. Receipt to inventory.
  2. A Negative adjustment of 10, with a note such as Cycle count.
  3. On Hand is at or below its Reorder Point. Reorder Qty says how many to order.